EasyManuals Logo
Home>InfiRay>Monocular>AP13

InfiRay AP13 User Manual

InfiRay AP13
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
InfiRay Outdoor AFFO Series Operating Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
IMPORTANT SAFETY INFORMATION
Environmental influences
WARNING! Never point the lens of the device directly at intense heat
sources such as the sun or laser equipment. The objective lens and
eyepiece can function as a burning glass and damage the interior
components. The warranty does not cover damage caused by improper
operation.
Ergonomics notes
Caution: Take breaks after longer periods of use to avoid wrist pain.
Risk of swallowing
Caution: Do not place this device in the hands of small children. Incorrect
handling can cause small parts to come loose which may be swallowed.
Safety instructions for use
- Handle the device with care: rough handling may damage the internal
battery.
- Do not expose the device to fire or high temperatures.
- Do not disassemble the device to access the battery. The battery is not
meant to be replaced by the end user.
- Only use the battery charger included in the delivery package.
- Only charge the device at temperatures ranging between 0°C and 40°C.
- The battery capacity decreases when operated in a cold ambient
temperature. This is not a fault and occurs for technical reasons.
- The recommended temperature for using this product is -10° to +50°
- Temperature exceeding this range will affect the service life of the product.
- Do not store the device for long periods at temperatures below 20°C or
above 50°C. This permanently reduces the capacity of the battery.
- Always store the device in a dry, well-ventilated space.
- If the device has been damaged or the battery is defective, send the
device to our after-sales service for repair.
- Before using this product in an environment with water, ensure that the
Type-C interface rubber cap on the bottom of the thermal imaging
monocular is tightly covered.
Safety instructions for the power supply unit
- Check the power supply unit, cable and adapter for visible damage
before use.
- Do not use any defective parts. Defective components must be
replaced.
- Do not use the power supply unit in wet or humid environments.
- Only use the original cable provided with the battery charger.
- Do not make any technical modifications.
For further information and safety instructions, please refer to the Operation
Manual provided. This is also available on our website in the download
center: www.infirayoutdoor.com.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the InfiRay AP13 and is the answer not in the manual?

InfiRay AP13 Specifications

General IconGeneral
BrandInfiRay
ModelAP13
CategoryMonocular
LanguageEnglish

Related product manuals