InfiRay Outdoor • AFFO Series • Operating Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
⚫ Press and hold down the M (4) button to enter the Menu.
⚫ Select the Wi-Fi menu option with the Up (5) / Down (3) button.
⚫ Turn Wi-Fi function on /off with a short press of M (4) button.
⚫ After the Wi-Fi of the device is enabled, search for the Wi-Fi signal with
the name such as AP13_XXXXXX on the mobile device, among which
XXXXXX is a 6-bit serial number composed of digits and letters.
⚫ Select this Wi-Fi, enter the password on the mobile to set up the
connection. The initial password is 12345678.
⚫ After Wi-Fi is successfully connected, you can control the device via the
mobile app.
⚫ Launch InfiRay Outdoor application on your mobile device (refer to
the section Update and InfiRay Outdoor).
Setting Wi-Fi name and password
The Wi-Fi name and password of AFFO
series can be reset in the InfiRay
Outdoor application.
⚫ After connected to the mobile device,
find and click the "Setting" icon in
the InfiRay Outdoor image screen to
enter the setting interface.
⚫ In the text box, enter and submit the new Wi-Fi name (SSID) and
password.
⚫ After submitting the change, reboot the device take the new name and
password effect.
Note
- When factory Settings are restored, the Wi-Fi name and password are
also restored to factory default settings.
19 Updates and InfiRay Outdoor
The AFFO series thermal imager supports InfiRay Outdoor technology,
which allows you to transmit the image from the thermal imager to the
smartphone or tablet via Wi-Fi in real time mode.
You can find detailed instructions about InfiRay Outdoor at the official
website www.infirayoutdoor.com.
The design of the AFFO series provides the software update option.
Updating is possible via the InfiRay Outdoor application. Also, it is feasible
to download and update software from the official website:
To Next Page
Loading...
