Copyright ©2018, Infoblox, Inc.All right reserved.
Introduction to the Infoblox 800 Series
This Guide provides an overview of the Infoblox 800 Series of network service appliances, including the Trinzic TE-810 and Trinzic TE-820, the
Trinzic Reporting TR-800, and the Network Insight ND-800. This Guide describes the unique features for each appliance model, and the hardware
elements, installation and deployment information common to all models in the Infoblox 800 Series. Consult the respective sections below for brief
descriptions of the unique features for your specific appliance:
Trinzic TE-810 and TE-820 Product Overview
Network Insight ND-800 Product Overview
Trinzic Reporting TR-800 Product Overview
You configure and manage the Infoblox 800 Series appliances through the Infoblox Grid Manager, a GUI that works seamlessly in Windows,
Linux, and Mac environments using standard web browsers. For more information about the Grid Manager, refer to the Infoblox NIOS
.Administrator Guide
All appliances in the Infoblox 800 Series are Class A digital appliances per FCC regulations, and are RoHS and WEEE compliant.
Trinzic TE-810 and TE-820 Product Overview
The Trinzic TE-810 and TE-820 network services appliances provide core network services, including DNS (Domain Name System), DHCP
(Dynamic Host Configuration Protocol), IPAM (IP Address Management), and NTP (Network Time Protocol). You configure and manage the
Trinzic appliances through the Infoblox Grid Manager. The Trinzic TE-810 and TE-820 appliances are recommended to operate as Grid members,
and can operate with a second Trinzic appliance of the same model in high availability (HA) mode.
Key features of the Trinzic TE-810 and TE-820 appliances include the following:
Support for Grid management and all administrative features for Infoblox IPAM, DNS, DDNS, and DHCP
High availability support
LOM (Lights Out Management) support
Note: The Trinzic TE-810 and TE-820 appliances support HA operation and are recommended to act only as a grid member.
Network Insight ND-800 Product Overview
The Network Insight ND-800 is a high performance network appliance that provides an expanded device discovery and network discovery feature
set, using SNMP and other protocols to discover, query, and catalogue network devices such as enterprise Ethernet switches, routers, firewalls
and other security devices, VoIP softswitches, load balancers, and end host devices. You configure and manage the Network Insight ND-800
through the Grid Manager. For more information about Discovery features and licensing, refer to the .Infoblox NIOS Administrator Guide
Key features of the Network Insight ND-800 appliance include the following:
Three (3) active 1GbE Ethernet interfaces: two (2) active interfaces to support Device Discovery features, and one interface (MGMT)
designated for device management (the HA port is inactive and reserved for future use)
Management through the Infoblox Grid
LOM (Lights Out Management) support
Note: The Network Insight ND-800 does not support HA operation and acts only as a grid member.
Trinzic Reporting TR-800 Product Overview
The Trinzic Reporting TR-800 is a 1U network appliance that collects data from Infoblox Grid members, stores the data in the reporting database,
and generates reports that provide statistical information about IPAM, DNS, DHCP, and system activities and performance. You configure and
manage the Trinzic Reporting TR-800 and view reports through the Grid Manager. For more information about Reporting features and licensing,
refer to the .Infoblox NIOS Administrator Guide
Key features of the Trinzic Reporting TR-800 appliance include the following:
Three (3) active 1GbE Ethernet interfaces: two (2) active interfaces to collect data for event reporting, and one interface (MGMT)
designated for device management (the HA port is inactive and reserved for future use)
Management through the Infoblox Grid
LOM (Lights Out Management) support
Note: The Trinzic Reporting TR-800 does not support HA operation and acts only as a grid member.
To Next Page
Loading...
General