To Next Page
C
Christina WangAug 17, 2025
How to flip image on InFocus IN118HDxc Projector?
- MmorganandrewAug 17, 2025
To flip the image on your InFocus Projector, turn off Ceiling Mount in the Basic menu.
How to flip image on InFocus IN118HDxc Projector?
To flip the image on your InFocus Projector, turn off Ceiling Mount in the Basic menu.
How to fix fuzzy or cropped image on InFocus IN118HDxc Projector?
To fix a fuzzy or cropped image on your InFocus Projector, change the computer's "Resolution" setting to match the projector's resolution (Windows 7: Control Panel > Display > Screen Resolution). This setting change process varies per operating system.
How to center the image on InFocus IN118HDxc?
To center the image on the screen with your InFocus Projector, move the projector, adjust its height, and adjust the horizontal or vertical position in Advanced Menu > Image > PC... menu.
How to make InFocus IN118HDxc image sharper?
To make the image sharper on your InFocus Projector, adjust the Sharpness in the Basic Menu.
How to square the image on InFocus IN118HDxc Projector?
To square the image on your InFocus Projector, adjust the Keystone on the keypad.
Why only laptop background appears on InFocus IN118HDxc?
If only your laptop’s background appears and not the Desktop icons on your InFocus Projector, change the Multiple Display setting to "Duplicate these displays" (Windows 7: Control Panel > Display > Screen Resolution). This setting change process varies per operating system.
How to correct reversed image on InFocus Projector?
To correct a reversed image on your InFocus Projector, turn off Rear Project in Advanced Menu > Setup > Image Setup... menu.
What to do if my InFocus Projector says “Signal out of range”?
If your InFocus Projector displays “Signal out of range”, press the Auto Image button on the remote. You may also need to adjust the computer refresh rate (Windows 7: Control Panel > Display > Screen Resolution > Advanced Settings > Adapter tab). This varies per operating system. Setting a different resolution on your computer might also help.
How to fix InFocus Projector with no start up screen?
To fix an InFocus Projector with no start-up screen, plug the power cord into the projector and press the Power button.
General| Resolution | 1920 x 1080 (Full HD) |
|---|---|
| Image Size | 30 - 300 inches |
| Aspect Ratio | 16:9 |
| Display Technology | DLP |
| Brightness | 3800 Lumens |
| Connectivity | HDMI, VGA, USB |
| Zoom Ratio | 1.2:1 |
| Video Compatibility | 1080p, 1080i, 720p, 576p, 576i, 480p, 480i |
| Input Ports | HDMI, VGA |
| Output Ports | VGA |
How to connect video and audio sources via VGA, HDMI, and other ports.
Details on connecting video sources via HDMI, Composite, VGA, Component, and S-Video.
Explanation of projector status lights for troubleshooting.
Common adjustments available in the projector's basic menu.
More complex adjustments available in the projector's advanced menu.
Step-by-step guide to safely cleaning the projector lens.
