InFocus IN5132c Quick Start Guide

10
Displaying the picture
1.
Activate your signal source. Turn the
signal source on, and make it send the
signal to the projector.
2.
Use the VOLUME + / VOLUME - buttons
to adjust the volume.
To silence the projector, press the MUTE
button on the remote control.
3.
Press the SOURCE button on the
projector. Each time you press the button,
the projector rotates through each input
port.
You can also use the remote control to
select an input signal.
4.
Press the RESIZE button on the remote
control. Each time you press the button,
the projector rotates through each aspect
ratio mode.
5.
Use the ZOOM ring to adjust the screen
size.
6.
Use the FOCUS ring to focus the picture.
7.
Turn the VERTICAL adjuster completely
counter-clockwise. Then turn it clockwise
and adjust the vertical lens position
upward.
8.
Turn the LOCK counter clockwise to
loosen the lock of the HORIZONTAL
adjuster.
9.
Turn the HORIZONTAL adjuster
clockwise or counter-clockwise to adjust
the horizontal lens position.
10.
Turn the LOCK completely clockwise
to tighten it and lock the horizontal lens
position.
(continued on next page)
STANDBY/ON SOURCE MENU
SOURCE button
VOLUME+ button
VOLUME- button
MUTE button
SOURCE button
RESIZE button
LOCK
FOCUS ring
ZOOM ring
LOCK
(horizontal lens
position lock)
HORIZONTAL
adjuster
VERTICAL
adjuster

InFocus IN5132c Specifications

General

Brand	InFocus
Model	IN5132c
Category	Projector
Language	English