InFocus INF7020 - Specifications

Page 11
Specifications
Model Number HW-SOUNDBAR-3
Speakers 4 x 3" High Eciency mid/bass transducers / 2 x 3/4" High Performance
Aluminum Dome Tweeters
Frequency Response 80Hz to 20 kHz
Amplier Integrated Class D @ 15x2 channel w/ .01% THD
Frequency Response 35Hz up to 80Hz
Inputs SPDIF 1 rear of HD sound bar
Stereo Audio 2 rear of HD sound bar
DC (24V) 1 rear of HD sound bar
Output Analog Sub-Woofer 1 rear of HD sound bar
Features Four 3" High-Eciency hand built mid/bass transducers
Two 3/4" High Performance aluminum dome neodymium tweeters
Speaker bar frequency response: 80Hz to 20kHz,
Integrated Class-D Amplier at 15x2 channel with .01% THD
Discrete 192kHz, 24-bit S/PDIF receiver enables up to 144dB dynamic range digital audio delivery
SNR 105db, Support for up to 192kHz, 24-bit Linear PCM via TOSLINK input
High Power Eciency with Low Power Consumpon Environmentally conscious, High-Performance
32-Bit 150MHz DSP Audio Engine, Impressive
Sound Pressure Level measuring 90dB SPL (1W @ 1M)
Advanced 24-Bit Linear PCM to PWM Engine with integrated thermal, overcurrent, over voltage,
over current protecon uncompressed audio transmission
Sync response within 3 seconds
Latency equal to the speed of sound (1 ms/.)
Guaranteed equal and consistent latency
High-eciency Class D amplier
2 Stereo RCA Input with Input Sensivity: 2Vrms (max)
1 S/PDIF Fiber Opc TOSLINK Input Supported Sampling Frequencies:
44.1kHz & 48kHz / Support Linear PCM Bit Depths: 16-bit, 20-bit, 24-bit.
SRS TruSurround / SRS TruVolume
Sound Pressure Level 90dB @ 1m
Power Input Power Adapter, AC-DC inverter type, Output: 24VDC, 2.7A 65W Max.
Voltage 110V at 60Hz
Dimensions 39.95” W x 4.82” H x 4.33” D (1015mm x 122mm x 110mm)
Net Weight 11.7lbs (5.3Kg) with feet, 9.3lbs (4.2Kg) without feet
Gross Weight 13.3lbs (6.5kg)
Cercaons SRS TruSurround HD/ SRS TruVolume
Compliances UL, FCC (VSB200)