How to fix the colors on InFocus monitors?
If the colors on your InFocus monitor don't appear correct, you can try the following: * Adjust the color settings in the Picture menu to your preference. * Reset the picture settings to their default values. * Ensure that all connections between the source and the monitor are correctly and securely made. * Verify that the cables being used are in good working condition.
Why does my InFocus Monitor have no sound?
If you're not getting any sound from your InFocus Monitor, here are a few things to check: * If using external speakers, ensure they are properly connected and powered on. * If using only internal speakers, verify the Audio menu Speaker setting is set to Internal. * For external sources like component, confirm the audio cable is correctly installed between the device and the monitor. * Check the volume level on the remote to ensure it's turned up and not muted. * If playing a video, ensure playback isn't paused and the video's audio isn't muted. * Remember that an HDMI® 1.3 (or higher) source and source device is required to hear audio via the HDMI cable.
What to do if my InFocus Monitor remote is not working?
If your InFocus monitor remote isn't working, first ensure the batteries are correctly installed and not dead. Then, verify the remote is turned on using the button on the bottom. Make sure you're pointing the remote at the table within a 26’ (8m) range and 30 degrees (horizontal/vertical) of the sensor. Lastly, check that the IR Control setting in the Advanced Option OSD menu is set to Normal.
How to resolve no image from external source on InFocus Monitor?
To resolve the 'no image from external source' issue on your InFocus monitor, check that the connections between the source and the monitor are correctly made and that the cables are in good condition. Also, ensure the correct input source is selected and that the input signal is compatible with the monitor.
How to fix colors on InFocus Monitor that don't look right?
If the colors on your InFocus monitor don't look right, try adjusting the color settings in the Picture menu or resetting the picture settings. Also, verify that the connections between the source and the monitor are correctly made and that the cables are in good condition.
Why is there audio noise on my InFocus Monitor?
Noise can occur when infrared communication equipment (for example, infrared cordless headphones) is used near the monitor. Move the infrared communication equipment away from the monitor to eliminate the noise.
Why is there no touchpad activity with external computer on InFocus monitors?
If you're experiencing no touchpad activity with an external computer connected to your InFocus monitor, try these steps: * Ensure that the USB B to USB type A cable is correctly plugged in from the laptop to the monitor. * Confirm that the laptop’s operating system is Windows® 7 or 8, as the monitor touchpad only supports these operating systems.
Why does my InFocus INF6502WB shuts down suddenly?
If your InFocus monitor suddenly shuts down, here are a couple of things to investigate: * Make sure that a source is active. * The monitor may be overheating. Ensure that there are no obstructions blocking the vents.
What to do if there is no image on InFocus monitors?
If you're not getting any image on your InFocus monitor, please check the following: * If you are attempting to display an external source, refer to the troubleshooting steps for 'No image from external source'. * Make sure that the monitor is powered on and the front LED is illuminated green.
How to troubleshoot no power on InFocus monitors?
If your InFocus monitor is not turning on, try the following: 1. Ensure the power cord is securely connected to both the power outlet and the monitor. 2. Confirm that the power switch is turned ON and that the power button on the remote or keypad has been activated (the front LED should be illuminated). 3. Test the power outlet by plugging in another electrical device to verify it's supplying the correct voltage.
General| Panel life | - h |
|---|---|
| Pixel pitch | 0.744 x 0.744 mm |
| Screen shape | Flat |
| Response time | 6.5 ms |
| Backlight type | W-LED |
| Display diagonal | 65 \ |
| Touch technology | Multi-touch |
| Display brightness | 350 cd/m² |
| Display technology | LED |
| LED backlighting type | Direct-LED |
| Supported video modes | 1080p |
| Touchscreen technology | Capacitive |
| Contrast ratio (typical) | 5000:1 |
| Display number of colors | - |
| Viewing angle, horizontal | 176 ° |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Number of simultaneous touchpoints | 16 |
| USB connector type | USB Type-A, USB Type-B |
| USB ports quantity | 6 |
| HDMI ports quantity | 4 |
| VGA (D-Sub) input ports | 1 |
| USB 2.0 Type-A ports quantity | 5 |
| Picture-in-Picture | No |
| Product color | Black |
| Panel mounting interface | 400 x 400 mm |
| RMS rated power | 20 W |
| Number of built-in speakers | 2 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | - W |
| Operating temperature (T-T) | 0 - 40 °C |
| Cables included | AC, USB, VGA |
Weight and Dimensions| Depth | 83.1 mm |
|---|---|
| Width | 1520.5 mm |
| Height | 895 mm |
| Weight | 53500 g |
Details regulatory warnings and compliance for the device.
Provides information on FCC/IC RF exposure compliance.
Instructions and guidelines for securely mounting the monitor.
Details connecting external devices and available I/O ports.
Instructions for inserting the LightCast key for enhanced features.
Steps for connecting the monitor to a power source.
How to set up monitor touchscreen control from an external PC.
Procedure for powering the monitor on and off.
Detailed explanation of each button on the monitor's remote control.
Instructions for launching and using the LightCast App for casting.
Guide to wirelessly streaming content from Apple devices using AirPlay.
Steps for wirelessly streaming content from Android/Windows devices using Miracast.
How to draw shapes, lines, and objects on the whiteboard canvas.
Steps to import image files into the whiteboard canvas.
How to select, copy, cut, paste, and delete objects on the whiteboard.
Procedure for saving whiteboard content in various formats.
Instructions for saving whiteboard content to a USB drive.
How to start a new, blank whiteboard canvas.
Steps to open previously saved whiteboard files.
Procedure to open whiteboard files stored on a USB drive.
How to move between pages within the whiteboard feature.
Steps to connect the monitor to a wireless WiFi network.
Instructions for pairing Bluetooth devices with the monitor.
How to rename the monitor for identification purposes.
Information on how to check the current software version.
Procedure for updating the monitor's firmware.
How to restore the monitor to its original factory settings.
Instructions for restarting the monitor.
How to reset LightCast registration information.
How to adjust the display size of images or content.
How to set a default email address in the settings.
Option to display desktop versions of websites in the browser.
How to set a custom homepage for the web browser.
Adjusts image quality settings like brightness, contrast, and color.
Controls screen display properties like position, clock, and aspect ratio.
Settings for speaker output and audio source selection.
Configures Picture-in-Picture mode, input sources, and display.
Settings for language, auto source, and factory resets.
Controls OSD turn-off timer, freeze function, and rotation.
Advanced settings like gamma, overscan, IR, and keypad control.
Explanation of the monitor's LED status lights and their meanings.
Details the warranty duration based on product model and country.
Specifies what is not covered by the product warranty.
Information on user-replaceable parts and self-service options.
To Next Page
