Operation48
SYSTEM SETUP: Advanced menu
FUNCTION
(default setting /
value)
DESCRIPTION
Quick
Cooling
(On)
Enables or disables the Quick Cooling function. Selecting On
enables the function and projector cooling time will be shortened
from a normal 90-second duration to approximately 30 seconds.
High Altitude
Mode
(Off)
A mode for operation in high altitude areas. See "Operating in a
high altitude environment" on page 40 for details.
Audio
Settings
Mute (Off)
Volume (5)
See "Adjusting the sound" on page 41 for details.
Menu
Settings
Menu Display Time (5 sec)
Sets the length of time the OSD will remain active after your last
button press. The range is from 5 to 30 seconds in 5-second
increments.
Menu Position (Center)
Sets the On-Screen Display (OSD) menu position.
Lamp
Settings
Lamp Mode (Normal)
Setting the projector in Economic mode also extends the lamp
timer automatic shutdown feature. See "Setting Lamp Mode as
Economic" on page 51 for details.
Reset Lamp Timer
Once the lamp is renewed, select Reset to return the lamp timer to
'0'. See "Resetting the lamp timer" on page 55 for details.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used. See
"Getting to know the lamp hour" on page 51 for details on how the
total lamp hour is calculated.
Security
Settings
Change Password
You will be asked to enter the current password before changing to
a new one. See "Utilizing the password function" on page 24 for
details.
Change Security Settings
Power On Lock (Off)
Splash Screen Lock (Off)
See "Utilizing the password function" on page 24 for details.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size, User
1, User 2, Language, Projector Position, High Altitude Mode.
To Next Page
Loading...
Need help?
General