Positioning your projector 9
Positioning your projector
Choosing a location
Your projector is designed to be installed in one of four possible installation
locations:
Your room layout or personal preference will dictate which installation location you
select. Take into consideration the size and position of your screen, the location of
a suitable power outlet, as well as the location and distance between the projector
and the rest of your equipment.
1. Front Table
Select this location with the projector placed near
the floor in front of the screen. This is the most
common way to position the projector for quick
setup and portability.
2. Front Ceiling
Select this location with the projector suspended
upside-down from the ceiling in front of the
screen.
Purchase the InFocus Projector Ceiling
Mounting Kit from your dealer to mount your
projector on the ceiling.
Set Front Ceiling in the SYSTEM SETUP:
Basic > Projector Position menu after you turn
the projector on.
3. Rear Table
Select this location with the projector placed near
the floor behind the screen.
Note that a special rear projection screen is
required.
Set Rear Table in the SYSTEM SETUP: Basic >
Projector Position menu after you turn the
projector on.
4. Rear Ceiling
Select this location with the projector suspended
upside-down from the ceiling behind the screen.
Note that a special rear projection screen and the
InFocus Projector Ceiling Mounting Kit are
required for this installation location.
Set Rear Ceiling in the SYSTEM SETUP: Basic
> Projector Position menu after you turn the
projector on.
To Next Page
Loading...
Need help?
General