33
Firmware I'm trying to upgrade my firmware, but
it is not working
Perform a soft reset of the device and restart your computer. If the problem persists, perform a hard
reset. If the resets do not resolve the problem, contact Service.
Macintosh
Compatibility
I can’t project my Macintosh
through LiteShow II
At this time, the Macintosh Operating System is not supported.
Enterprise mode-specific troubleshooting
Connection Host name feature not working; can’t
connect via host name
The DHCP server needs to be configured to deliver the WINS server IP address.
Connection Networked LiteShow adapters do not
appear on “connect to projector” list
UDP packets may be blocked by the switch or router. If this feature can’t be enabled, use the “Connect
to Other Projector” dialog to connect to the adapter.
Security WPA-2 not working on Windows XP This support is not natively installed on XP or part of automatic updates. An update needs to be
downloaded from Microsoft.
Category Issue Solution
To Next Page
Loading...
Need help?
General