Need help?Do you have a question about the InFocus ScreenPlay 777 and is the answer not in the manual?
General| Display Technology | DLP |
|---|---|
| Native Resolution | 1280 x 720 |
| Contrast Ratio | 2000:1 |
| Lamp Type | UHP |
| Lamp Life | 2000 hours |
| Projection Size | 33-300 inches |
| Inputs | Composite Video, S-Video, VGA |
Covers FCC warning, Canadian compliance, and general agency approvals for the device.
Critical guidelines for projector placement, ventilation, power, and safe lamp handling/disposal.
Describes the projector's video input connectors and 12V trigger outputs.
Instructions for optimal projector placement and reference for ceiling mount installations.
Details how to connect various video sources like HDTV, DVD, and VCRs to the projector.
Explains automatic power save features and the manual shutdown procedure for the projector.
Covers remote control usage, button functions, range, and basic troubleshooting.
Steps to optimize image quality using menu settings and aspect ratio controls.
Customizing projector settings like rear projection, ceiling mode, power saving, and display messages.
Guide to accessing, navigating, and changing settings within the projector's onscreen menus.
Detailed explanations of settings like Keystone, Contrast, Brightness, Color, Tint, and Aspect Ratio.
Adjusting gamma tables, overscan for noise reduction, and advanced signal settings.
How to save and recall custom image configurations using presets.
Configuring TrueLife features like Chroma/Luma Detail, Chroma Delay, Film Mode, and Noise Reduction.
Adjusting color space, temperature, and fine-tuning RGB gain/offset for accurate color.
Selecting color gamuts and setting the appropriate video standard (NTSC, PAL).
Configuring input sources, autosource, rear projection, ceiling mode, and display messages.
Managing power save, logo light, lens control, startup logos, blank screens, and menu language.
Using factory reset, lamp reset, test patterns, and ADC calibration for service.
Step-by-step guide for lamp replacement, including safety warnings and disposal.
Detailed steps for installing the new lamp module and resetting the lamp hour timer.
Importance and procedure for cleaning the lamp filter screen to maintain lamp life and performance.
Directs users to a separate guide for detailed lens installation instructions.
Explains red LED blinking patterns to diagnose projector errors and potential solutions.
Visual guide illustrating projection distance, offsets, and screen dimensions for placement.
Provides calculated projection distances for various lenses and screen sizes, plus viewing distance recommendations.
Specifies ceiling mount weight requirements and provides mounting dimensions for installation.
Details compatibility for various video, computer, and communication sources and their respective connectors.
Outlines serial port settings and the format for sending commands to the projector.
Lists RS-232 commands for adjusting image parameters like color, contrast, and aspect ratio.
Lists RS-232 commands for controlling motorized lenses, zoom, language, and power save.
Lists RS-232 commands for color offsets, source selection, and video standard configuration.
Provides a reference table of key codes for remote control functions like menu navigation and image adjustments.
Details the warranty period for the projector, lamps, and accessories, along with exclusions.
Explains how to get warranty service and outlines limitations on liability and legal actions.
To Next Page
