19
Troubleshooting
English
POWER
TEMP
LAMP
: Green steady
:–
: Red flashing
(1-second interval)
It is time to replace the lamp. Replace the lamp following the
steps under “Replacing the Lamp” in the Reference Guide on
the CD-ROM that comes with the projector. Press the [ESC]
key to clear the warning message.
Message : It is time to replace
the lamp. Use the
procedure in the
User’s Guide to
replace the lamp as
soon as possible.
POWER
TEMP
LAMP
: Amber flashing
Red steady
:–
: Red steady
The allowable life for the lamp has been exceeded, and the
projector will not turn on. Replace the lamp following the steps
under “Replacing the Lamp” in the Reference Guide on the
CD-ROM that comes with the projector.
Message : The lamp has
exceeded its service
life! The projector will
not turn on until you
replace the lamp.
Indicator/Error Message Description and Required Action
Infocus IN15_UG_E.book Page 19 Tuesday, October 23, 2007 5:37 PM
To Next Page
Loading...
Need help?
General
