infor LN HTML5 - Troubleshooting

<Workbench Web Server Base URL>/webui/servlet/admin
2 Select Infor LN > Workbench Deployer.
3 Specify this information:
Deployment username
Specify the <Deployment username>.
Deployment password
Specify the <Deployment password>.
Confirm deployment password
Specify the <Deployment password>.
Web server URL
Ensure that this field is filled with http://localhost.
Port number
Ensure that this field contains the correct value.
If the Tomcat web server is used, the value must be equal to the configured HTTP port number.
If the JBoss web server is used, the value must be equal to the configured port for the native
management interface, default 9999.
Web server username
Specify the <Web Server username>.
Web server password
Specify the <Web Server password>.
Confirm web server password
Specify the <Web Server password>.
4 Optionally, on the Server specifics tab, specify the server name. You can specify the server name
if you run on WebLogic, and you want to deploy to a specific server.
5 Save the changes.
6 Click Test to verify the changes.
The Log field must show output similar to this message:
The following applications are installed on your Application Server:
manager
webui
Troubleshooting
When testing the workbench web server's LN UI configuration, these messages might be displayed:
Infor LN HTML5 Workbench Administration Guide | 13
Configuration of workbench web server