URL http://... not correct (Couldn’t connect to server)
Solution 1: check and correct the Deployment URL field, especially the port value.
Solution 2: ensure that the workbench web server is operational.
URL http://... not correct (Couldn’t resolve the host name)
Solution: check and correct the Deployment URL field, especially the host name.
URL http://... not correct (Unauthorized)
Solution: ensure that deployment user name and password match the values specified earlier.
See Configuring workbench web server’s LN UI instance.
URL http://... not correct (Service Unavailable)
Solution: check the log files of the workbench web server's LN UI instance and correct errors.
Configuring workbench web server base URL
Configure the Enterprise Server with the network location of the workbench web server at which
workbenches are started.
See the configuration values in the table in Determine the value of configuration items and complete
these steps:
1 Start the general purpose LN UI.
2 Start the Workbench Parameters (HTML-based) (ttaad7131m000) session.
3 Specify this information:
Workbench Web Server ID
Specify WBWAR.
Workbench Web Server Base URL
Specify <Workbench Web Server Base URL>.
Example: https://nlbavwhtml5wb.infor.com:8445
4 Click OK to save the changes.
Infor LN HTML5 Workbench Administration Guide | 15
Configuration of workbench web server
To Next Page
Loading...