infor LN HTML5 - Configuring Workbench Deployment URL; Troubleshooting

Failed to ping the server, check Web Server URL and Port number.
Solution: check the Web Server URL and Port number fields.
Failed to login, check Web Server username and password.
Solution: check the Web Server username and Web Server password fields. Ensure that the
values are consistent with the specified values.
Configuring workbench deployment URL
Configure the Enterprise Server with the network location and credentials that are required during
workbench deployment.
See the configuration values in the table in Determine the value of configuration items and complete
these steps:
1 Start the general purpose LN UI.
2 Start the Workbench Deployment URLs (ttaad7140m000) session.
3 Create a new deployment URL, specify this information:
Deployment
Specify an appropriate description.
Deployment URL
Specify <Workbench Web Server Base URL>/webui/servlet/deploy.
Example: https://nlbavwhtml5wb.infor.com:8445/webui/servlet/deploy
User
Specify <Deployment username>.
Password
Specify <Deployment password>.
4 Save the changes.
5 Verify the changes. Select the new entry. Then select Actions > Test URL.
Troubleshooting
When testing the Deployment URL, these messages might be displayed:
URL http://... not correct (Not Found)
Solution: check and correct the Deployment URL field.
Infor LN HTML5 Workbench Administration Guide | 14
Configuration of workbench web server