Chapter 4: Workbench installation
These steps are described:
• Installing a Workbench by deploying it on the Workbench Web Server.
• Deploying an (existing) Additional File to the Workbench Web Server.
• Creating / updating an Additional File of a Workbench.
Prerequisites
Meet these prerequisites:
• The configuration of Workbench Web Server is successfully completed. See Configuration of
Workbench Web Server.
• You can start these sessions:
• Import Workbench Application (ttadv2570m200)
• Workbench Applications (ttadv2570m100)
Deploying an additional file
Perform this step when the workbench is deployed for the first time or when the workbench additional
file was updated by a PMC solution.
To deploy the additional file of a workbench:
1 Start the general purpose LN UI.
2 Optional: Start the Additional Files (ttadv2570m000) session to check the presence or history of
the workbench additional file to deploy.
3 Start the Workbench Applications (ttadv2570m100) session.
4 Select Actions > Select URLs
Use the Selected column to select the workbench web server.
5 Save and exit.
6 Select the row with the additional file (.wbwar extension) of the desired workbench.
7 Select Actions > Deploy
Wait for the workbench deployment to complete.
8 Close the Workbench Applications (ttadv2570m100) session.
Infor LN HTML5 Workbench Administration Guide | 21
Workbench installation
To Next Page
Loading...