inform PDSP 33015 User Manual

30
6.1.2. Mimic Panel
Mimic panel is a diagram, which shows the path of energy flow in the UPS by means of several
LED’s. Definitions of LED states are shown below:
LED's
ID
COLOR
DEFINITION
STATE
Line 1
Green
Input mains voltage is OK and rectifier is active
Steady
Input mains voltage is OK and rectifier is inactive
Flashing
Input mains voltage is very close to its upper/lower limit and
rectifier is active
Input mains voltage is not OK
Off
Line 2
Green
Bypass voltage is OK
Steady
Bypass mains voltage is not OK and output voltage is not
synchronized to the bypass voltage
Flashing
Bypass mains voltage is not OK
Off
Battery
Red
Battery mode is active and battery voltage is OK
Steady
UPS is performing battery test and battery voltage is OK
Battery mode is active and battery voltage is close to its lower limit
(energy available in the battery is about to be depleted)
Flashing
Battery test is active and battery voltage is close to its lower limit
(energy available in the battery is about to be depleted)
Rectifier is active and able to supply whole power required by the
inverter
Off
Inverter
Green
Load is fed via inverter
Steady
Inverter is not active
Off
Load
Green
Load is powered
Steady
Load is powered but UPS is overloaded
Flashing
Output voltage is not OK
Off
Bypass
Yellow
Load is fed via static bypass line
Steady
Bypass is not active
Off
Fault
Red
No alarms
Off
A minor alarm is present
Flashing
A major alarm is present
Steady

inform PDSP 33015 Specifications

General

Brand	inform
Model	PDSP 33015
Category	UPS
Language	English