EasyManua.ls Logo

Infortrend EonStor DS S12 Series - S12 X-Gxxxx Models PSU (Power Supply Unit)

Infortrend EonStor DS S12 Series
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EonStor DS S12/S16/S24 Series Hardware Manual
1.4.5 S12x-Gxxxx Models PSU (Power Supply Unit)
PSU Canister
The system is equipped with two (2) redundant, hot-swappable, 350W PSUs at the
rear section of the chassis.
NOTE:
Swapping the PSU also removes the cooling fans within.
Each PSU comes with a power socket and a power switch to turn the system on and
off. Cooling fans provide sufficient airflow. A single LED indicates the PSU status.
When a power supply failure occurs, the LED will light up red. An extraction handle
at the rear of the PSU is designed to help properly install or remove the module.
A screw hole on the extraction handle helps secure the PSU to the chassis.
37

Table of Contents

Related product manuals