EonStor DS S12/S16/S24 Series Hardware Manual
6 Appendix
6.1 Technical Specifications
6.1.1 Host/Drive Interface
Fibre-host RAID models (S12F/S16/S24F series)
Host O/S Compatibility Host O/S independent
Host Interface 4Gb/s or 8Gb/s Fibre Channel
Host Channels 4 pre-configured host channels (per controller)
Drive Interface Supports up to 12 or 16 channels of 6Gbps SAS or 3Gb/s SATA-II
Drive Channels All drive channels are pre-configured and cannot be changed
Fibre/iSCSI Hybrid-host RAID models (S16F-R/G2842 series)
Host O/S Compatibility Host O/S independent
Host Interface 8Gb/s Fibre Channel + RJ-45 Gigabit Ethernet
Host Channels
4 pre-configured Fibre host channels (per controller) +
2 pre-configured iSCSI host channels (per controller)
Drive Interface Supports up to 16 channels of 6Gbps SAS or 3Gb/s SATA-II
Drive Channels All drive channels are pre-configured and cannot be changed
SAS-host RAID models (S12S/S16/S24Sseries)
Host O/S Compatibility Host O/S independent
Host Interface 3Gb/s or 6Gb/s Multi-lane SAS SFF-8088 host ports
Host Channels
Multiple SAS PHYs logically combined into 2 host channels per
controller
Drive Interface 12, 16 or 24 drive bays for 6Gb/s SAS or 3Gb/s SATA drives
Drive Channels All drive channels are pre-configured and cannot be changed
SAS/iSCSI Hybrid-host RAID models (S16S-R/G2242-4 series)
Host O/S Compatibility Host O/S independent
Host Interface 6Gb/s SAS Channel + RJ-45 Gigabit Ethernet
Host Channels
2 pre-configured SAS host channels (per controller) +
2 pre-configured iSCSI host channels (per controller)
Drive Interface Supports up to 16 channels of 6Gbps SAS or 3Gb/s SATA-II
Drive Channels All drive channels are pre-configured and cannot be changed
iSCSI-host RAID models (S12E/S16/S24E series)
Host O/S Compatibility Host O/S independent; also dependent on iSCSI offload utilities and
hardware
151
To Next Page
Loading...