INFOSEC UPS SYSTEM E3 PERFORMANCE RT Series User Manual

INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 06 17 AA 59 205 05


Display
Functions
Backup time information
Indicates the backup time in pie chart.
Indicates the backup time in numbers.
H: hours; M: minute.
Warning & fault information
Indicates that warning and fault occur.
Indicates the warning and fault codes
(codes are listed in details chapters 3.7 and 3.8).
Setting operation
Indicates the setting operation.

Input/Output & battery information
Indicates the input/output voltage, input/output frequency or battery
voltage.
BATT = battery; V = voltage; Hz = frequency.
Indicates the external battery pack number.
Load information
Indicates the load level by 0-24%, 25-49%, 50-74%, and 75-100%.
Indicates overload.
Indicates that the load or the UPS output is short circuited.
UPS status
Indicates that programmable management outlets are working.
Indicates that the UPS alarm is disabled.
Indicates the UPS powers the output directly from the mains (see
details page 13).
Indicates that the battery charger is working (see details page 15).
Indicates that the UPS is working in boost mode
(see details page 15).
Indicates that the UPS is working in buck mode (see details page 15).
Battery information
Indicates the battery level by 0-24%, 25-49%, 50-74%, and 75-100%.
Indicates low battery.
Indicates a problem with the battery.

INFOSEC UPS SYSTEM E3 PERFORMANCE RT Series Specifications

General

Brand	INFOSEC UPS SYSTEM
Model	E3 PERFORMANCE RT Series
Category	UPS
Language	English