INFOSEC IPEL EVOLUTION 1000 VA - Comprehensive Technical Specifications

INFOSEC UPS SYSTEM - 4, rue de la Rigotière – 44700 Orvault – FRANCE - www.infosec.fr
Hot Line : tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 05 05 04 205 06
8
12. TECHNICAL SPECIFICATIONS
iPEL e 350 iPEL e 500 iPEL e 700 iPEL e 1000
Technology Line interactive with Auto Voltage Regulation
Output form Modified sine wave
Protection
discharge / overcharge and overload protection
+ fax modem line
Power 350 VA 500 VA 700 VA 1000 VA
TECHNOLOGY
Power factor 0,6 0,6 0,6 0,5
Dimensions WxDxH 100 X 330 X 140 (mm)
Weight kg 4,8 5 6 6,5
PHYSICAL
Output connectors
3 UPS protected outlets / 1 surge protected outlet /
2 surge protected RJ11
Voltage [110-115-120 V] or [220 - 230 - 240 V]
Voltage range [85 - 140 V] [162 - 290 V]
INPUT
Frequency 45 - 65 Hz auto detection
Voltage [110-115-120 V] or [220 - 230 - 240 V]
Regulation + / - 10 % (battery mode)
OUTPUT
Frequency Battery mode : 50 - 60 Hz +/- 1 Hz
Type Sealed maintenance free
Backup time 8 to 30 minutes (depending on the load)
BATTERY
Recharge time 8 hours to 90 % after a complete discharge
FILTER Spike protection 125 joules
Noise level < 40 dB at 1 meter
ENVIRONMENT
Operating
environment
0° C - 40° C, 0 to 90 % humidity rate
(non condensing)
AC Mode Green led lighting
Backup Mode Yellow led flashing
INDICATOR
Fault Red led lighting
Battery Mode Sounding every 10 seconds
Battery replacement Sounding every 2 seconds
Low battery Sounding second until automatic stop
Overload or defect Every 0,5 second
AUDIBLE
ALARM
Fault Continuously sounding
INTERFACE Communication port USB
MANUFACTURING
Security / Standard
CE - ISO 9001 - PCT