Need help?Do you have a question about the INFOSEC X4 RM PLUS Series and is the answer not in the manual?
Important safety warnings regarding electric shock, installation, handling, and emergency procedures.
Precautions for battery handling, replacement by qualified personnel, and disposal.
How to charge the UPS batteries before first use and automatic recharging during operation.
How to connect the UPS to the power supply and connected equipment, checking compatibility.
Warning that batteries must be replaced by qualified technicians due to high short circuit current risk.
General| Product Type | UPS |
|---|---|
| Topology | Line Interactive |
| Output Voltage | 230V |
| Input Voltage | 230V |
| Output Frequency | 50/60 Hz |
| Input Frequency | 50/60 Hz |
| Frequency Range | 45-65 Hz |
| Communication Ports | USB, RS232 |
| Form Factor | Rackmount |
| Waveform | Simulated Sine Wave |
| Battery Type | Sealed Lead Acid |
| Operating Temperature | 0-40°C |
| Storage Temperature | -15-45°C |
| Humidity | 0-95% non-condensing |
| Output Power Capacity (VA) | 3000 VA |
| Output Power Capacity (Watts) | 2700 Watts |
| Outlets | IEC 320 C13 |
| Transfer Time | 4-6ms |
| Battery Recharge Time | 4 hours |
To Next Page