Desk Series
900024281 R11 000 05/1016
Copyright© 2016 Ingenico
All rights reserved
15
4_4 Installing the Terminal - Cable
x i n g
Opening down-side trapdoor
Unclip the trapdoor by pushing on the clip with your nger as
shown on the gure here below.
Then lift the trapdoor rearward to remove it, as shown by arrows
on the gure
Closing down-side trapdoor
To close the trapdoor, start by
landing trapdoor on to bottom
casing as shown on the gure ,
manage 5/6mm distance for clip
insertion then push and clip it.
To Next Page
Loading...
