Ingenico iCT220 Initial Setup

• Once completed, hit the back button on your tablet until you are back at the
initial settings screen.
• Select “Payment Device Setup”, then select “Ingenico iCT250/iCT220”.
• Enter the IP address that you wrote down earlier from your Ingenico iCT220,
and type 6200 for the port number.
Page 3 of 3

Ingenico iCT220 Specifications

General

Weight	325 g
Display	128 x 64 pixels
Connectivity	Ethernet
Card Readers	Magnetic stripe
Security	PCI PTS 3.x certified
Processor	ARM9 32-bit RISC processor