iSC480 Power Requirements
iSC480 SAM and Micro SD Card Slots
iSC480 Peripheral Connectors and Host Interface Ports
7_4_1 iSC480 Overview
This section provides a quick reference for the iSC480 PIN pad device. The iSC480 features a color touchscreen, MSR, smart card
reader, and contactless card reader. The contactless card reader is available as an integrated module or as an external module with
antenna. Refer to the below image for an overview of the iSC480 PIN pad device.
7_4_2 iSC480 Power Requirements
A separate Ingenico DC power supply (192006210 and power cord 188413214) is required when connecting the iSC480 device via
RS232, USB (5V), and Ethernet. When the device is powered from a POS, power may be provided via a USB (12V or 24V) or
RS485 cable.
Connect the cable to the Multipoint port before connecting power to the terminal. Only use the power supply which was
provided by Ingenico.
Do not disconnect power from the terminal until you have been instructed to do so.
Before you disconnect the terminal from the POS, you must first disconnect power in order to prevent damage to the
terminal.
To Next Page
Loading...
