Ingenico IUC150B - Installation Procedures; 6.1 Product mounted on kiosk panel

Integration guide iUC150B & iUC160B
900021059 R11 000 04/0416
Copyright© 2015 Ingenico
All rights reserved
32
6_Procedures for product installation
Device doesn’t require volume inside the kiosk.
The label with PCI Hardware Version Number must be visible once the device is installed.
6_1 Product mounted on kiosk panel
Products can be mounted directly on kiosk panel. It requires a cut out in the kiosk to the dimensions
detailed in the diagram below (all dimensions are in millimeters).
6_1_1
Installing the iUC150B product
iUC 150B Installation : footprint and cutout (front side)
Surface must be at and without burrs
No sharp edge