GPRS Terminals - iWL251
If you have chosen the iWL251 terminals you will need to follow these instructions.
What’s in the box?
The iWL251 terminal handset
Charging base
Battery
Paper roll
The Power Supply Unit (PSU)
SIM card (this will arrive separately to your terminal device)
QUICK SETUP GUIDE
1. Connect the power supply to the socket on the back of the terminal base.
2. Plug the 3-pin power supply plug into an available power socket.
3. Place the terminal handset on the base, the terminal will light up and begin the charging
process. We would recommended allowing the terminal to charge for up to 4 hours.
4. Remove the cover from the back of the handset and insert the SIM card into the slot
marked SIM, with the metal contacts on the card facing downwards.
5. Replace the compartment cover.
8 GPRS Terminal - iWL251
Your terminal will require charging for at least two hours prior to
‘Performing First Time Setup’ (p10)
To Next Page
Loading...
