EasyManua.ls Logo

Ingenico iwl280 - Battery Installation and Charging

Ingenico iwl280
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
iWL280 Wireless Series
900004307 R11 000 03/1503
Copyright© 2015 Ingenico
All rights reserved
18
Characteristics
Li-ion 2000 mAh
Charge (power supply-1A) 50% capacity in 1,5 h; full capacity in
4 hours
Battery life 450 transactions in GPRS with
fully charged battery, printing and
backlit activated.
4_5_1 Main characteristics
4_5 Battery
4_5_2 Installing the battery
*The battery capacity depends on the model of terminal and its use
WARNING
Check that the terminal is not connected to the main electric
network.
Turn your terminal and unclip the battery trapdoor by pushing on
the clips with your nails as shown on the picture.
Disengage the trapdoor.
Take the battery pack included in the
box.
Locate the battery pack connector
beside the battery compartment.
Can remain powered ON up to
150 hours with connected GPRS
link and terminal in sleeping state
starting with fully charged battery
and without energy consumption
related to backlit or radio link

Related product manuals