Ingersoll-Rand 150BMG Series - Part Description

03524832_ed13 9
150BMG Series Air and Gas Starters - Parts List
Item Part Description
Part
Number
Item Part Description Part Number
1 Motor Housing Cover Assembly 150BMP-A102A 32 Drive Shaft
2 Housing Cover End Plug (3) HSPPS3 for Model E22RH5-020 10BM-108
* Nameplate 150BM-301 for Models C21RH-6, C21LH-11,
10BM-8
* Nameplate Screw (3) R4K-302 C21RH-16, C21RH-17,
5 Motor Housing Cover Cap Screw (4) 107-25 C21RH-31, C21LH-32, E21RH6-20
6 Cover Cap Screw Washer (4) D02-504 E21LH11-020
† 7 Motor Housing Cover Gasket 150LF-283 ‡ 33 Drive Shaft Collar 10BM-30
† 8
Rear Rotor Bearing R3H-24 † 34 Drive Shaft Front Bearing T02-33
† 9 Rear Rotor Bearing Retainer G57-729 † 35 Rotor Pinion Retainer 10BM-69
10 Rear End Plate 150LF-12A 36 Rotor Pinion
11 Cylinder 150BM-3 for “C” Models 101BMPD-17
12 Cylinder Dowel 10BM-98 for “E” Models 150BME-17
† 13 Vane Packet (set of 5 Vanes) 10BM-42-5 † 37 Front Rotor Bearing 10BM-24
14 Motor Housing 10BM-40 † 38 Gear Case Gasket 150LF-284
15 Gear Case Assembly 10BM-37 39 Front End Plate 150LF-11A
† 16 Bearing Ejecting Washer 10BM-25 40 Rotor 10BMP-53
† 18 Drive Shaft Rear Bearing 10BM-399 # 51 Air Strainer Assembly K4U-A267AT
18A Plug R2-227 52 Air Strainer Cap K4U-286AT
19 Drive Gear 53 Air Strainer Plug 22SR-165
for C models 10BMC-9 54 Air Strainer Screen K4U-61AT
for E models 150BME-9 55 Gasket (2) 150BMP-283
† 19A Drive Gear Thrust Washer 10BM-15 56 Gasket 150BMP-284
† 20 Drive Gear Key 10BM-610 * Air Strainer Nipple (1-1/4” x 2-1/2”) KKM-286
21 Gear Case Cover Assembly * Mounting Adapter 9BM-B212-5/8
for Model C12RH-13 10BM-378 * Mounting Adapter 9BM-B212-1
for all other models 10BM-478 * Mounting Adapter 10BM-CU212-1/2
† 22 Drive Shaft Grease Seal 150BMP-271 * Road Splash Deector Assembly 150BM-A735
23 Drive Housing Cap Screw --- * Muer Assembly 150BM-A674
Lock Washer (12) 10BM-67 * Plastic Gasket SMB-431
24 Drive Housing Cap Screw (12) 10BM-744 * Pipe Sealant SM-441
27 Drive Housing Assembly 9BM-A300-H2 * Tune-up Kit
150BM-TK2
† ‡ 30 Drive Housing Bearing ML50K-318 (includes illustrated parts 7, 8, 9, 13,
‡ 31 Starter Drive 16, 18, 19A,20, 22, 30, 34, 35, 37,
for Models BM21RH-6 and BMG21RH-6
10BM-299-21 and 38)
for Models BM21LH-11 and BMG21LH-11
10BM-299-19
for Models BM21RH-5 and BMG22RH-5
10BM-299-22
* Not Illustrated
† Indicates Tune-up Kit part.
‡ For every C model listed, there is a comparable E model. With the exception of the Drive Gear (19) and Rotor Pinion (36), comparable C and E
models are identical.
# Recommended on applications where air or gas could be contaminated.