1
2
3
4
Unit Functions:
The following Icons are used by the X8I to
display the Controller Active Functions.
EHR - Equal Hours Run
Increasing to normal operational levels (Prefill,
target pressure change or at system start)
Below the active lower, or load, pressure set point
Above the upper, or unload, active pressure set point
The following Icons are used by the X8I to
display the Controller Status.
Stopped
Standby
Started and Running
Alarm (Warning)
Shutdown (Trip)
Day of the week
#1 = Monday
#2 = Tuesday
#3 = Wednesday
#4 = Thursday
#5 = Friday
#6 = Saturday
#7 = Sunday
Between the lower, or load, and upper, or unload,
active pressure set points
FILO - Timer Rotation
ENER - Energy Control
Active Functions :
Operating Mode :
System Pressure Status :
Units Status :
Power Failure Auto-Restart
Table #1
Table #2
Table #3
Table #4
Standby Mode Active
Prefill Function
Pressure Schedule
Function Inhibited (Manual Override)
Remote Manual Override
System Pressure Value
System Pressure Units
Real Time Clock
24 Hour Format
To Next Page
Loading...
