InHand ER605 - Default Settings

InHand ER605 User Manual
5
3 Default Settings
No.
Function
Default Settings
1
Cellular network
dial-up
− Both SIM cards are enabled, and SIM1 is used preferentially.
2
Wi-Fi
− The Wi-Fi 2.4 GHz access point (AP) is enabled, and its SSID is
ER605– followed by the last six digits of the wireless MAC address.
− The Wi-Fi 5 GHz AP is enabled, and its SSID is ER605-5G–
followed by the last six digits of the wireless MAC address.
− The authentication method is WPA2-PSK.
− The two access points have the same password: last eight digits of the
router's SN.
3
Ethernet
− Four LAN interfaces are enabled.
− The IP address is 192.168.2.1.
− The subnet mask is 255.255.255.0.
− The DHCP server is enabled to allocate IP addresses to connected
devices from the address pool 192.168.2.2–192.168.2.100.
4
Network access
control
− Local HTTP and HTTPS services are enabled, using ports 443
− Access from the cellular network is disabled.
5
User name and
password
− The user name is adm (super administrator), and the password is
123456.