InHand ER605 User Manual
36
Figure 11-2-a/b Adding a PBR entry
Notes:
The source and destination addresses of the PBR entry cannot be set to Any at the same time.
11.3 Traffic Shaping
To optimize your network, you can create shaping policies to apply per-user controls on a per-protocol basis.This
allows you to reduce bandwidth for recreational traffic, and to prioritize bandwidth for your business-critical enterprise
traffics.Choose Security > Traffic Shaping and click Edit to modify the bandwidth of the uplink.
Figure 11-3-a Editing uplink bandwidth
Click Add Create a new rule to add a traffic shaping rule. Traffic shaping policies consist of a series of rules that are
performed in the order in which they appear in the policy, similar to custom firewall rules. There are two main
components to each rule: the type of traffic to be limited or shaped (rule definition), and how that traffic should be
limited or shaped (rule actions).
To Next Page
Loading...
