InHand ER605 User Manual
9
Figure 4-2-1-d Configuring PPPoE
To use the second WAN interface, click Add on the 【Internet】 page to add WAN2. This interface provides the same
functions as WAN1.
Figure 4-2-1-e Adding WAN2
Notes:
After you add WAN2, interface LAN1 changes to WAN2.
After you remove WAN2, the interface changes back to LAN1.
When WAN2 is removed, all configuration on this interface, including the static routes, inbound and
outbound rules, port forwarding, policy-based routing, VPN，and traffic shaping, is deleted.
configurations take effect only after saving.
To Next Page
Loading...
