Inkbird PLUS - How to Add Fingerprints, Passwords, and IC Cards

3.How to Add Fingerprints, Passwords, and IC Cards
Notes:
a) Fingerprint, passwords, and IC cards can all be administrators.
b) When entering a password or card in the app, if there is no fingerprint,
password, or card at the lock end, the password or card must be under
administration authority.
1) How to Add Fingerprints
Step1: Go to settings to enter fingerprint management, then click "Add
Fingerprints" to choose a member to capture his fingerprint.
Step2: Click "Start Capturing" and put your finger on the fingerprint
recognition area of the lock and hold for more than 5 seconds as prompted
by the app. Each fingerprint needs to be collected three times. For the
integrity of the fingerprint, a different part of the fingerprint should be
captured each time.
Note that the first fingerprint of the administrator cannot be deleted. All
fingerprints under administrator authority can be used to verify
administrator identity.
12