Page 3 of 3
Thank you for your purchase
Step 5:
Turn the assembled round table to an upright position. Assembly is completed.
Note: Legs Can be Adjusted
With
Adjustable Levelers
Gathering Height
P5
Step 4: Attach the Gathering Connectop (P5) to the assembled Table Top and then assemble the leg frame as
shown below for Gathering Table
(H1)x4
(H4)x4
(H5)x4
(H7)x1
Bolts Ø5/16"x75mm
Lock Washers Ø5/16"
Flat Washers Ø5/16"x19mm
Allen Key 4mm
H5
H4
H1
H7
Dining Height
Gathering Height
* Please follow step 4 for Gathering Table Assembly.
ADDITIONAL NOTE ABOUT SAFETY:
BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE.
THEY SHOULD BE INSPECTED AT LEAST EVERY 3 MONTHS AND RE-TIGHTENED AS NEEDED TO PREVENT DAMAGE OR INJURY,
AND ENSURE STABILITY.
To Previous Page
Loading...
