INMO Air 2 - Sound and Display; Language; System Update; Weather; Laboratory

6
5. Sound and Display
- Step1: Find "Settings", click "Sound & Display"
- Step2: You can independently adjust the volume, brightness, display mode, display time
and indicator light of the glasses
6. Language / System Update
- Step1: Find "Settings" , click "About"
- Step2: You can set up the system language, and view the model and memory of the glasses
- Step3: If there is an update to the glasses system, you will also receive an update reminder
on this page.
7. Weather
- Step1: Find "Settings", click "Location"
- Step2: With location, the glasses home page can show the weather conditions in your
current location
8. Laboratory
- Step1: Find "Settings", click "Laboratory". After turning on the headset mode, the glasses
can listen to the Bluetooth music of the phone / answer the phone address book
- Step2: Slide the glasses leg and hang up the call from the mobile phone address book.
- Step3: Some mobile phones need to turn on the call audio permission when pairing the
device
- Step5: Double-click the right mirror leg to return to the desktop and keep the call.
- Step6:If you need to go back to the call page again, double-click the left mirror leg, enter
the control center, and quickly enter the call page