1
2
3
4
4.3. Operating steps of beginners
· Hold the handlebar with two hands, Promote L8 and the power on.
· When the power on, Front decorative lights and tail lights will be lit.
· Step on the pedal with one foot; look ahead, another foot shall be on the ground forwardly, applying initial velocity, after the initial
speed control level is activated, L8 can accelerate to travel forwardly upon starting accelerator handle.
· At that time, another foot also steps on the pedal. Two feet stand in staggered way front and back. Stands upright naturally and two
eyes look ahead horizontally, like standing on the ground. Keep the balance of body.
· Lightly press the accelerator handle for acceleration. The degree of acceleration depends on holding degree on accelerator. Beginners
shall lightly hold the accelerator handle and accelerate slowly.
· Rotate the handle can control L8 in direction. Due to the length of L8, you should pay attention not to swerve within the narrow
space.
· While Scooter needs to decelerate or stop during the driving process, press fingers on brake button until scooter decelerates or
stops.
· At the same time can also be used after stepping on the rear fender, also can make L8 slow down or stop.
· After starting the brake, APO (Automatic Power Off) of the right handle accelerator becomes invalid.
· When not using L8, parking for 1 minutes can be automatically shut down.
4.4. Body folding steps
· 1 : Open the Folding quick spanner.
· 2 : Forward nudge handlebar.
· 3 : Press the Folding button
（As far as possible with the second step at the same time）.
· 4 : Walking down the folding handlebar until a click sound.
· 5 : Folding can be completed.
15
To Next Page
Loading...
