EasyManua.ls Logo

InMotion L8 - Legal Statement; Statement about the Product

InMotion L8
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. Care and Maintenance
6.1. Storage
Unreasonable storage will cause inside lithium battery life shorter and other hidden dangers. L8 shall be placed at indoor dry places
with suitable humidity and temperature.
Avoid parking the electric scooter at sun-bathing places (even the trunk of your car) in that the temperature of the body and the
battery from sunbathing may rise as high as 50, The battery function and product lifespan may be damaged.
When L8 is not used, the battery will discharge automatically. The battery power shall be monitored within three months and
charged in time to guarantee battery fully charge. Avoid the irrevocable losses from long-time storage of battery without electricity
(deep discharge of battery)
In winter, battery may lose the electricity power due to low temperature.
L8 shall be charged fully before placing for a long time.
6.2. Cleaning
Before cleaning, L8 shall be turned down. Charging wire shall be pulled up and the charging port shall be closed. During the rinsing
process, water shall not flow into the battery-charging port.
Use soapy water, clean water or soft cloth to rub the outer cover of L8. Prohibit using high pressure water gun to swash L8.
The waterproof and waterproof level of L8 shall be IP65 that is, spilling resistant and dust resistant. Thus, it is not allowed to dip L8
in water, which may cause L8 permanent damage.
6.3. Handing
Battery and electricity devices shall not be treated as general domestic rubbish. Since you have made contributions to environmental
protection by driving L8, in order to further avoid unwanted pollution.
Please handle your electric Scooter and all the related components (battery) through authorization processing facilities.
Please abide by the updated guidance notes. Please consult dealers or contact after-sale departments if you have any questions.
6.4. Inflation and Replacement of the Interior and Exterior Tires
If the tire pressure is insufficient, please fill in time to ensure the normal tire pressure.
If you get a flat tire or are in need of new tires, please contact an INMOTION authorized distributors or the INMOTION service
department.
·
·
·
·
·
·
·
·
·
·
·
·
·
17

Related product manuals