5.3. Waste Disposal and Discarding
Please do not treat the battery and power devices as general wastes. You have made a great contribution to the
environmental protection through the purchase of your INMOTION E-BIKE P1, so in order to avoid any unnecessary
pollution please deal with your E-Bike and all related components (battery included) through the authorized treatment
facilities.
5.4. Inflation & Inner and Outer Tires Exchange
When there is insufficient air pressure, please inflate them in time. Factory default tire pressure of Inmotion E-Bike P1 is
2.8 Bar for the front wheel and 2.5 Bar for the rear tire.
If the tire needs to be exchanged due to tire burst or other reasons, please contact Inmotion authorized agents or
Inmotion After Sales department.
5
44
Routine Care and Maintenance
To Next Page
Loading...
Need help?
General
