5.5. Brake Maintenance
1. Insert the elbow to the brake, and fix it on the screw of the frame. According to the indications, to the left side it
becomes loose and to the right side it becomes tight. Please lightly turn left to make the brake a little loose.
2. Then clench the brake with one of your hands, in order to make the rear brake come close to the brake pad. Keep
clenching.
3. Right press the brake with the elbow until it is fixed and tighten the brake. Then loose the E-Bike brake, and the
brake will return automatically. It is not abrasive once the brake pad is correctly fixed.
5
45
Routine Care and Maintenance
To Next Page
Loading...
