Inner Range Integriti Elite User Manual

19
IntegritiIntegriti
IntegritiIntegriti
Integriti LCD Terminal Keypads User Manual.
An Event message may be displayed on the Terminal
indicating which Area an Alarm has occurred in.
Logon to the Terminal as described earlier.
(PIN code + <OK>)
The display will show the specific details of the
Alarm.
The Area name will be displayed on the top line.
The type of Event (e.g. Alarm Event) and the Input
name will be displayed on the bottom line.
The message will scroll if more than 16 characters.
e.g. “Had Alarm on Front Door Reed Switch”
Note the details, then press <OK> to acknowledge
the message. If there are other messages to be
acknowledged, the next Event will be displayed until
all messages have been acknowledged.
The display will briefly show “No more Messages”,
before going to the Area ON/OFF display.












Alarm messages must be acknowledged by a User with the appropriate authority. These
messages provide precise information of the type of alarm, the Area it has occurred in,
and the Input that generated the alarm.
- ,
Acknowledge an Alarm.






Panic / Duress / Alarms

Inner Range Integriti Elite Specifications

General

Brand	Inner Range
Model	Integriti Elite
Category	Keypad
Language	English