Inner Range Integriti Elite User Manual

22
IntegritiIntegriti
IntegritiIntegriti
Integriti LCD Terminal Keypads User Manual.












OR
Search for a Named Action by name by pressing
the DIGIT key that represents the first letter of the
name. (You may have to press the key 2 or 3
times, depending on the letter required and the
names in the system.)
If the Named Action you want is not displayed
because of other names beginning with the same
letter, use the <DOWN> Arrow key to locate it.
When the desired Named Action is displayed;
Press the ON key or OFF key to turn the Named
Action On or Off as required. The display will
update accordingly.
OR
Press the <RIGHT> arrow key to enter a timer
value. Enter a 3-digit numerical value then use
the <5> (M) or <7> (S) key to select Minutes or
Seconds.
When the required timer period is displayed, press
the <ON> key to execute the action.
The display will briefly show “Action Sent...”, and
will then show this status display that includes a
countdown timer.
Select another Named Action to control using the
<UP> and <DOWN> arrow keys or <DIGIT>
keys.
OR
Press the <END> key to exit to the normal
display.
The message; “Error: That action not allowed.”
will appear if you attempt to control a Named
Action is not allowed at this Terminal.












, , ...






or
or







Inner Range Integriti Elite Specifications

General

Brand	Inner Range
Model	Integriti Elite
Category	Keypad
Language	English