INNOCN 44C1G User Manual (English)

Questions and Answers:

C
Carrie MejiaAug 18, 2025
What to do if my INNOCN 44C1G has no display but the power light is on?
- M
  Michael HartmanAug 18, 2025
  If your INNOCN Monitor's screen is black but the power light is on, try the following: * Ensure the video cable is properly connected and secure. * Check if your operating system is in hibernation, sleep, or power-save mode. Press any key or move the mouse to wake it. * Inspect the video cable connector for bent or broken pins. * Verify the correct input source is selected in the Input Source menu. * Test with another identical signal cable (HDMI / DisplayPort).
E
epetersAug 20, 2025
Why is my INNOCN 44C1G Monitor USB interface not working?
- T
  twhiteAug 21, 2025
  If the USB interface on your INNOCN monitor isn't working, consider the following: 1. Ensure a USB-B uplink cable (included in the package) is connected from your computer to the monitor’s USB-B port. The USB ports on the monitor will not work without this connection. 2. Verify that your monitor is turned on. 3. Try reconnecting the uplink cable to your computer. 4. Reconnect the USB peripherals (downstream connector). 5. Switch the monitor off and then on again. 6. Reboot your computer. 7. If you are using external portable HDD, connect them directly to the computer system, because some USB devices require higher electric current.
E
Elizabeth RossAug 23, 2025
What to do if INNOCN 44C1G won't turn on (black screen and no power lights)?
- J
  Judith LopezAug 23, 2025
  If your INNOCN Monitor isn't booting up, showing a black screen, and has no power lights, try these steps: * Verify that the power outlet is functioning properly by testing it with another electrical device. * Ensure that the power button on the front panel is fully pressed and working correctly. * Check the video cable connector for bent or broken pins.
D
David YoungAug 26, 2025
How to fix poor focus on INNOCN 44C1G Monitor (fuzzy, blurry, or ghosting)?
- T
  Thomas MataAug 26, 2025
  To address poor focus (fuzzy, blurry, or ghosting) on your INNOCN monitor: * Eliminate video extension cables. * Reset the monitor to its factory settings. * Change the video resolution to the correct resolution and aspect ratio. * If the words are still blurry, try enabling or disabling the CLEAR TYPE function from Windows.
D
diazdebbieAug 28, 2025
Why doesn't my INNOCN 44C1G Monitor image fill the entire screen?
- S
  Stacy OrtizAug 28, 2025
  If the image on your INNOCN monitor is centered but doesn't fill the entire viewing area: * Check the Aspect Ratio setting in the Display menu OSD. * Check the resolution setting in your PC. * Reset the monitor to factory settings.
M
Michelle AdamsAug 30, 2025
Why can't I adjust brightness/contrast on my INNOCN Monitor through OSD?
- A
  Anthony WilsonAug 30, 2025
  If you cannot adjust the brightness or contrast ratio on your INNOCN monitor through the OSD, make sure the “contextual mode” is OFF. You can check this setting under OSD?Picture Setting?Contextual mode?off.
C
Christine MasseySep 2, 2025
What to do if control panel keys do not work on INNOCN 44C1G Monitor?
- E
  Erik SawyerSep 2, 2025
  If the control panel keys on your INNOCN monitor aren't working, try the following: * Press only one key at a time. * Restart the computer. * Ensure a valid video signal is going through the monitor before turning on the OSD.
S
Seth MurphySep 4, 2025
How to get a higher refresh rate on my INNOCN 44C1G?
- C
  Christina MillerSep 5, 2025
  To achieve a higher refresh rate on your INNOCN monitor: * Make sure your video card supports that feature. * Ensure you are using a DisplayPort connection from your computer to your monitor.
D
Debbie WaltonSep 7, 2025
Why does my INNOCN 44C1G Monitor screen appear yellow?
- G
  gomezkellySep 7, 2025
  If your INNOCN monitor screen appears yellow, ensure that the device was not set to “Care Eyes mode.” Check under OSD?Picture Setting?Contextual mode?Care Eyes mode.
S
smithfrancesSep 9, 2025
Why is there no video after plugging in USB Type-C from computer to INNOCN 44C1G?
- L
  Lindsay RothSep 10, 2025
  If you're not getting a video signal after plugging in USB Type-C from your computer to the INNOCN monitor, it may be because not every computer/phone’s USB Type-C port will support video out signals. Please check your cable and your computer/phone to ensure they support a video signal.

INNOCN 44C1G Specifications

General

Resolution	3840x2160 (4K UHD)
Panel Type	VA
Aspect Ratio	16:9
Viewing Angle	178° (H) / 178° (V)
Ports	HDMI 2.0, DisplayPort 1.4, USB-C, USB-A, 3.5mm audio out
Color Gamut	95% DCI-P3