Innovaphone IP200 - The Two Operating Modes

Operating Manual IP Telephone IP200 - 14 -- 14 -
2.9.2 The two operating modes
There are two different operating modes for using your IP telephone with multiple calls.
The differences are described below:
Operating mode 1
An active call and a call on hold are shown on the display. There could be calls waiting.
e.g.1
- active call
- Call on hold
e.g.2
- active call
- call on hold
- calls waiting
Operating mode 2
There is an active call and no call on hold is shown on the display. There is at least one
call waiting.
E.g.:
- active call
- calls waiting