2
Copyright Innovative Technology Ltd 2014 GA717-3
1 INTRODUCTION
This manual describes the operation of the BV50 Bill Acceptor programmed with Firmware Version 4.04 or
greater.
CAUTIONS:
• THIS PRODUCT MUST BE FITTED WITH A 2 AMP TIME DELAY FUSE BEFORE USE.
• DUE TO DIFFERENT BILL CYCLE TIMES THERE MAY BE TIMING DIFFERENCES FROM THE NV PRODUCTS.
We recommend that you study this manual as there are many new features permitting new uses and more
secure applications.
If you do not understand any part of this manual please contact your local office for assistance, contact
details are available from www.bellis-technology.com. In this way we may continue to improve our product.
WARNING
ONLY SUITABLY TRAINED PERSONNEL SHOULD CARRY OUT ANY WORK ON THIS EQUIPMENT IN
ACCORDANCE WITH ALL CURRENT LOCAL, NATIONAL AND INTERNATIONAL HEALTH AND SAFETY
REGULATIONS.
Innovative Technology Ltd
Derker Street – Oldham – England - OL1 4EQ
Tel: +44 161 626 9999 Fax: +44 161 620 2090
E-mail: support@innovative-technology.co.uk
Web site: www.innovative-technology.co.uk
AUSTRALIA
support@innovative-technology.com.au
BRAZIL
suporte@bellis-technology.com.br
CHINA
support@innovative-technology.co.uk
GERMANY
supportDE@innovative-technology.eu
ITALY
supportIT@innovative-technology.eu
SPAIN
supportES@innovative-technology.eu
UNITED KINGDOM
support@innovative-technology.co.uk
REST OF THE WORLD
support@innovative-technology.co.uk
To Next Page
Loading...
