EasyManua.ls Logo

Innovative Technology ITRR-301 - Adjusting the Silver Screw; Proper Compact Disc Usage

Innovative Technology ITRR-301
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Adjusting the Silver Screw
This silver screw protects the phonograph chassis during transportation.
If the speed of your phonograph seems slow or you hear a rubbing sound,
turn the screw fully clockwise with a coin or screwdriver.
Before transporting the unit, return the screw to its original position by turning it
fully counter-clockwise.
Proper Compact Disc Usage
This unit has been designed specifically for sound reproduction
from compact discs bearing the mark to the right:
No other discs can be used.
z Always place the compact disc in the disc tray with the label facing upward. (Compact discs can be
played only on one side).
z To remove a disc from its storage case, press down on the centre of the case and lift the disc out,
holding it carefully by the edge.
z Fingerprints and dust. should be carefully wiped off the disc recorded surface from the disc’s center
toward its edge.
z Never use chemicals such as: record sprays, anti-static sprays or fluid, benzene or thinner to clean
compact discs. Such chemicals will irreparable damage to the disc's plastic surface.
z Discs should be returned to their cases after use to avoid serious scratches that could cause the laser
pickup to skip.
z Do not expose discs to direct sunlight or high humidity and temperature for extended periods.
z Do not stick paper or write anything with a ballpoint pen on the surface of the label side.
z Do not use irregular shaped CD's (octagonal, heart-shape, etc.), as they can damage the unit.
6

Related product manuals