Troubleshooting Guide
For further assistance with your product, call Innovative Technology at 1-877-ITECH-97 (1-877-483-2497)
8
PROBLEM POSSIBLE CAUSE SOLUTION
Unit will not power on Unit is unplugged Connect the unit to the AC
power supply
GENERAL
No sound output from
speakers
The volume is turned down too
low.
The input selector does not
match the playback source.
Increase the volume
Select the desired input
source.
Cassette deck door will
not close
The cassette tape is not
inserted properly
Insert the cassette tape
correctly
Cassette tape will not
play
The cassette tape is not
inserted properly.
The end of the tape has been
reached
Insert the cassette tape
correctly.
Flip the cassette.
No sound from tape The tape heads are dirty Clean the tape heads.
CASSETTE
The sound is distorted
or faint.
The tape heads are dirty Clean the tape heads.
Cannot listen to any
station, or signal
appears weak.
The station is not tuned-in
properly.
A TV set is being used nearby
and is interfering with the
radio reception.
Properly tune-in the
desired station.
Turn-off the interfering TV
set.
RADIO
The sound is distorted The antenna is not oriented
properly.
Re-orient the antenna until
reception improves
CD stops immediately
after starting, or
pauses/stops while
playing
The CD is inserted upside
down.
The CD is dusty or dirty or there
is condensation on the CD.
Insert the CD with the
printed side facing
upwards
Carefully clean and dry the
CD.
No sound. The CD player is
paused/stopped.
Press the PLAY/PAUSE
button.
CD PLAYER
Specific CD is noisy, or
playback stops or
skips.
The CD is scratched, damaged
or warped.
The disc is very dirty.
The CD should be
changed.
Carefully clean the CD.
To Next Page
Loading...
