Inogen One G2 User Manual

13
Operating Instructions
Operating Instructions Chapter 3
3
!
C
Intake
Exhaust
General Instructions
1. Place the Inogen One® G2 in a well ventilated
location.
Air intake and exhaust must have clear access.
Locate the Inogen One® G2 in such a way that any auditory
alarms may be heard.
WARNING Avoid use of the Inogen One® G2 in presence of pollutants, smoke
or fumes. Do not use the Inogen One® G2 in presence of flammable
anesthetics, cleaning agents or other chemical vapors.
CAUTION Do not obstruct air intake or exhaust when operating the device.
Blockage of air circulation or proximity to a heat source may lead to
internal heat buildup and shutdown or damage to the concentrator.
2. Ensure the particle filter is in place.
CAUTION Do not operate the Inogen One® G2 without the
particle filter in place. Particles drawn into the
system may damage the equipment.
3. Install the battery.
Insert the Inogen One® G2 battery by sliding battery into place
and locking at bottom of concentrator.
English

Inogen One G2 Specifications

General

Type	Portable Oxygen Concentrator
Operating Altitude	Up to 10, 000 ft (3, 048 m)
Battery Duration	Up to 4 hours (single battery)
Flow Settings	1 to 5
Noise Level	38 dBA
Oxygen Flow	Pulse Dose
Battery Duration (Double Battery)	Up to 8 hours
AC Power	100-240V, 50-60Hz
DC Power	12V
Oxygen Concentration	90%
Oxygen Output	Pulse dose
Oxygen Purity	90% - 96%
Power	AC/DC power supply