Inogen One G2 - Cleaning, Care and Maintenance; Cannula and Case Maintenance

31
Troubleshooting
Troubleshooting Chapter 5
Use external power supply or
replace battery with one that is
fully charged
Check power supply connection and
verify green light is solid
Contact your equipment provider
Press On/Off button to power
concentrator
Check cannula and its connection
to concentrator nozzle
Battery is discharged
or no battery is
present
Power supply is not
connected properly
Malfunction
Concentrator is not
powered on
Cannula is not
connected properly or
is kinked or obstructed
Concentrator does
not power on when
On/Off button is
pressed
No oxygen
Recommended Solution
Refer to Chapter 4
Possible Cause
Refer to Chapter 4
Problem
Any problem
accompanied
by information
on concentrator
display, indicator
lights and/or
audible signals
Solutions to some possible issues you may encounter are described in this section.
Inogen One® G2 Oxygen Concentrator
5
English