Inovalley WIRELESS POOL THERMOMETER - 4.3 Alarm Mode; 4.3.1 Activating; Deactivating the Alarm; 4.3.2 Cancelling the Alarm; 4.3.3 Snooze Alarm

Version 1.4 Page 8
2. Press the SET button again, and the minute will begin flashing. Press the C/F button to
advancetheminute.
3. PresstheSETbuttonagain,andthesecondwillbeginflashing.PresstheC/Fbuttontotoggle
between12hourand24hourdisplaymode.
4. PresstheSETbutton
againtoreturntonormalmode.
4.2.2 SetAlarmTime
1. While in the ALARM mode, press the SET button, and the alarm hour will begin flashing.
PresstheC/Fbuttontoadvancethealarmhour.Make specialnoteoftheAM/PMicon.
2. PresstheSETbuttonagain,andthealarmminutewill beginflashing.PresstheC/F
buttonto
advancethealarmminute.
3. PresstheSETbuttonagaintoreturntonormalmode.
4.2.3 SetDate
1. While intheDA TEmode,presstheSETbutton,andtheyearwillbeginfl ashing.Pressthe
C/Fbuttontoadvancetheyear.
2. Press the SET button again, and the month will begin flashing. Press the C/F button to
advancethemonth.
3. PresstheSETbuttonagain,and
thedaywillbeginflashing.PresstheC/Fbuttontoadvance
theday.
4. PresstheSETbuttonagaintoreturntonormalmode.
4.3 AlarmMode
4.3.1 Activating/ DeactivatingtheAlarm
1. While in theALARM mode,presstheC/F buttontoactivate thealarm. The alarmicon will
appear
.
2. PresstheC/Fbuttonagaintodeactivatethealarm.Thealarmiconwilldisappear.
4.3.2 CancellingtheAlarm
When an alarm has been triggered, the alarm will  sound and the alarm icon  will flash for 60
seconds.Pressanybuttononthebackofthedisplaytosilencethealarm.
4.3.3 SnoozeAlarm
When an alarm has been triggered, the alarm will  sound and the alarm icon  will flash for 60
seconds.PresstheCHANNELbuttononthetopofthedisplayorallowthealarmtotimeouttoenter
the snooze mode. The snooze icon will flash
(ZZ). After five minutes, the alarm will sound again.
Afterfiveconsecutivesnoozealarms,thesnoozealarmmodewillbedeactivated.
4.4 Min/MaxMode
Notes:
‐Ifyouhavemultipleremotetemperaturesensors,selecttheChannelyouwishtoviewthemin/max
databeforeyouenterthemin/maxmode.
‐ Resetting the minimum and maximum values resets all three channels at the same tim e for
multi‐channeloperation.

1. Minimum Values.While in Normal Mode, press
the MIN/MAX button to enter the